Audio Technica AT-LP120-USB Specifications download pdf (Page 7)

For best results, do not install

operate this unit near conditions of

heat, moisture, dust, or heavy vibrations. (Note: Bright fluorescent lights

may affect the visibility of the speed-indicating strobe dots. If this is a

problem, simply cover the area

with

your hand,

album cover, etc.)

Preparing

Play

Remove the stylus guard from the stylus assembly and unlock the

tone arm rest if it

locked.

Turn the

power

dial

the

position. The speed selector and

strobe illuminator will light up.

3. If desired, push the stylus target light button

raise and turn on

the light for illumination

the stylus tip position on the record.

Place a record on the slip mat, lining up its center hole

with

the

center spindle. For

45 RPM records, place the 45 RPM adapter

the center spindle before placing the record on the platter.

Set the platter rotation speed (33/45/78)

match that of the

record. (Note:

set the platter speed for 78 RPM, push both the

33 and 45 RPM buttons simultaneously.)

Playing

the

Record

Press the start/stop button; the platter begins

rotate.

2. Raise the tone arm by lifting the tone arm lift control lever

the

position.

Position the tone arm over the desired location (groove)

the record.

Lower

the tone arm by moving the tone arm lift control lever

the DOWN position. The tone arm descends slowly onto the

record and play begins.

or-

Use the finger-lift on the headshell assembly

position the tone

arm over the desired location on the record. Carefully

lower

the

tone arm

the record surface.

Operation

Checking and Adjusting Pitch

If desired, select a

+/-

10% or +/- 20% pitch adjustment range by

pressing the pitch button. Then move the pitch adjust slide control

up or down

make pitch adjustments. (Note: The pitch adjust

slide control has center

detent

position for

pitch variation.)

As illuminated by the red light coming from beneath the power

dial. observe the strobe dots on the edge of the platter.

the

appropriate

row

strobe dots appears

be stationary, the platter

moving at the precise rated speed. If the dots appear to be

moving

the right, the platter

moving

below

rated speed; if

they appear

be moving

the left, the platter

moving above

rated speed.

•

60Hz

.45

If the quartz speed lock button

pressed, the internal quartz lock

will hold the platter at precise rated speed regardless

the

position of the pitch adjust slide control. (Note: The

LED

indicator

to the left of the pitch adjust slide control's center position will

illuminate

GREEN

when

the quartz lock is active and

RED

when

variable pitch

active.)

4. If desired, press the direction button to reverse the rotation of the

platter. The appropriate direction LED will illuminate.

Suspending or Ending Play

To suspend play, lift the tone arm

with

the cueing lever.

When play

finished, raise the cueing lever, move the tone arm

the rest position and secure the tone arm

with

the tone arm

locking clamp.

If using the stylus target light, turn it

off

by pushing the

light down.

4. Press the start/stop button

apply the brake and stop the

platter rotation.

Turn the

power

dial

the

OFF

position.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comments to this Manuals

No comments

Audio Technica AT-LP120-USB Specifications Page 7

Comments to this Manuals

Related products and manuals for Audio turntables Audio Technica AT-LP120-USB