Audio Technica ATW-1662 Specifications download pdf (Page 9)

Optional System Accessories

WIRELESS ESSENTIALS

™

MICROPHONES AND CABLES

All Wireless Essentials accessories are terminated for use with ATW-T1600

and other UniPak

™

transmitters.

AT829cW Miniature cardioid condenser lavalier microphone.

Includes clothing clip and windscreen.

MT830cW Subminiature omnidirectional condenser lavalier

microphone. Includes clothing clip and windscreen.

MT830cW-TH “Theatre” model, same as MT830cW except beige colour

mic and cable for concealment.

AT831cW Miniature cardioid condenser lavalier microphone.

Includes clothing clip and windscreen.

AT851cW Surface-mount wide-range semi-cardioid condenser

microphone.

AT857AMLcW 19" gooseneck cardioid microphone.

Mounts to

"-27 thread. Includes windscreen.

AT889cW Headworn noise-cancelling condenser microphone.

Includes windscreen and cable clip.

ATM35cW Cardioid condenser instrument microphone.

Includes AT8418 clip-on instrument mount.

ATM73cW Headworn cardioid condenser microphone.

Includes windscreen.

ATM75cW Headworn cardioid condenser microphone.

Includes windscreen.

PRO 8HEcW Headworn hypercardioid dynamic microphone.

Includes windscreen and cable clip.

PRO 35xcW Cardioid condenser instrument microphone.

Includes AT8418 clip-on instrument mount.

AT8319 Hi-Z instrument/guitar cable with

" phone plug.

AT8317

Connecting cable for UniPak transmitter with an XLRF-type

input connector, for Lo-Z microphones with XLRM-type

output terminations.

RECEIVER ACCESSORIES

AT8616 Joining-plate kit allows rack-mounting two ATW-R160

receivers side-by-side in a single (1U) 19" rack space.

ATW-A20 Pair of UHF ground-plane antennas with

"-27 thread for

mounting to microphone stands, etc. For use with

ATW-R160 receivers. Takes RF cables with BNC

connectors, not included; see RF Cables below.

ATW-A49 Pair of UHF wide-band directional LPDA (log periodic dipole

array) antennas provide enhanced signal pickup for UHF

wireless systems throughout a wide band range

(440-900 MHz). Each antenna paddle is matched to

50 ohms impedance with and integral hi-quality low -loss

BNC connector, 6dB gain. For permanent or temporary

installation; mounts to

"-27 threads.

AEW-DA800EU UHF ( DA800: 795-820, DA860: 840-865 MHz) active

AEW-DA860UK unity-gain antenna distribution system provides two

“1-in, 4-out” RF channels; connects a pair of antennas to

as many as four diversity receivers. A cascade ouput is

provided as a directional coupler to drive additional

distribution amps. Includes four DC interconnect cables to

power up to four receivers, eight RF output cables and two

rack-mount adapters. Mounts in a single (1U) 19" rack

space. For use with ATW-R160 EX (ATW-DA800) and

ATW-R160 UK (AEW-DA860) receivers.

ATW-RA1 Rack-mount antenna kit brings antenna inputs to the front of

receiver for ease of setup, or when receiver is enclosed in a

metal rack. Includes a pair of extendable antennas. NOTE:

Two adapter kits are required when mounting two receivers

side-by-side in a single 19" rack space.

RF Cables Low-loss design, 50 ohm impedance, with BNC-to-BNC

connectors:

AC12 RG58-type cable (12')

AC25 RG8-type cable (25')

AC50 RG8-type cable (50')

AC100 RG8-type cable (100')

TRANSMITTER ACCESSORIES

AT8114 Foam windscreen for handheld transmitter.

AT8141 Water-resistant pouch for UniPak transmitter.

AT8390 Shielded audio cable with

" to

" phone plugs.

Available in a variety of lengths.

(Also available with one straight and one 90° phone plug

as the AT8316.)

AT8456a Stand clamp for handheld transmitter,

"-27 threads.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Audio Technica ATW-1662 Specifications Page 9

Comments to this Manuals

Related products and manuals for Microphones Audio Technica ATW-1662