Audio-technica AEW-T1000A User Manual download pdf (Page 14)

Artist Elite

4000 & 5000 Series Professional UHF Wireless Systems

Receiver Controls and Functions (Continued)

Receiver Menu Functions

Frequency Selection (manual)

See “Setting Receiver Frequency Manually” on page 21.

Frequency Selection (automatic)

See “Setting Receiver Frequency Using IntelliScan™” on page 22.

Lock

Programmable locks restrict the ability to change receiver settings,

reducing the possibility of unauthorized access or unintended

changes during performances.

Setting Description

NO.LOC Receiver functions and frequency settings can

be edited from the receiver’s front panel or from

an associated computer via an Ethernet connection

to a linked AEW-R5200.

ALL.LOC Receiver functions and frequency settings cannot

be edited from the front panel or from a computer

via an Ethernet connection to a linked AEW-R5200.

ALL.LOC must be changed via the receiver’s Menu

before other settings can be changed.

PC.LOC Receiver functions and frequency settings can be

edited from the receiver’s front panel, but they

cannot be edited from an associated computer (via

an Ethernet connection to a linked AEW-R5200).

RX.LOC Receiver functions and frequency settings can be

edited from an associated computer (via an Ethernet

connection to a linked AEW-R5200), but they cannot

be edited from the receiver’s front panel.

When any lock condition is applied to a receiver (ALL., RX. or PC.),

the LCD window displays a small “RX LOCK” just to the right of

the frequency. If an action is attempted that currently is locked out,

the LCD will briefly display “LOCKED”, then return to its previously

displayed contents.

Note: Locks remain in place even when receiver power is turned off.

However, locks may be removed by using the Menu.

Antenna Power

This function turns on the 12V AC antenna power for use with

powered antennas or accessories.

Squelch

The Artist Elite Series employs a unique digital Tone Lock™

squelch system that provides enhanced rejection of interference. In

addition to providing highly effective control of unwanted noise, the

Tone Lock signal from the transmitter also conveys data with the

transmitter’s name (Tx Name), battery condition, mute status and

lock status back to the receiver for display. In addition to displaying

in the receiver’s LCD window, the data are also displayed on an

Ethernet-connected computer.

The squelch level is adjustable in fifteen 2 dB steps, providing a 30

dB range. Increasing the squelch level – also called “tightening the

squelch” – can cause a reduction in usable range of the wireless

transmitter, so use the lowest value that reliably mutes the unwanted

RF signals. (If interference is a problem, first consider trying a

different frequency, either manually or by scanning.)

Meter Hold

When activated (“METER HOLD”), this function permits the bar

meters in the LCD window to capture and display the highest-level

“AF” audio modulation (a solid bar) and the lowest-level “RF” signal

(a flashing bar) received from the transmitter. This is particularly

useful when setting up the system initially, performing a sound-

check, or diagnosing operating problems. The default setting is Off

(“METER NORMAL”).

When the Meter Hold is On, it is possible to reset it – to obtain a

new set of RF and AF readings – without turning it off-and-on using

the Menu/Edit functions. Simply press the transmitter’s Power/

Mute button once (to mute the transmitter) and wait until the

receiver’s Alert light comes on, indicating the Mute condition. Then

press the transmitter’s Power/Mute button once again, to un-mute

the transmitter. After the Alert light goes out, a new set of min/

max RF/AF readings will be indicated on the bar meters. (Note that,

depending upon the digital updating-and-confirming sequence of the

Mute condition data from the transmitter, it can take from a few to

many seconds for the Alert light condition to change. The Meter Hold

readings are not reset until the Alert light has turned on, then off.)

Note: Any or all of these receiver functions may be stored to, or

loaded from, one of the five user presets.

Using "PRESET" Store and Recall

There are two aspects to Preset operation: Storing a particular

collection of settings for future use (“STORE”), and recalling a

stored collection of settings (“LOAD”). All Artist Elite receivers and

transmitters permit the storing and recalling of up to five user-defined

Preset combinations—with customized names, if desired—plus the

recalling of the factory-defined Default (“DEF”) settings.

While the standard Preset names (“PRSET1” – “PRSET5”) can be

used, customized receiver and transmitter identification can simplify

system operation, especially in larger systems. For example, a guitar

channel’s Rx Name could be “GUITAR”, while the transmitters for

the performer’s two different guitars could be named “GTR-1” and

“GTR-2”.

To store Preset configurations:

1. Touch the Mode/Set button once to move to Menu mode.

2. Touch the Up arrow twice to move to “PRESET” in the LCD

window. (The second line of LCD will show currently

loaded presets.)

3. Touch the Mode/Set button once. “LOAD” (or “STORE”)

appears in the LCD.

4. Touch the Up or Down arrow once, if needed, to change the

selection to “STORE.”

5. Hold the Mode/Set button until “PRSET1” (or the name of the

currently loaded Preset) appears on the second line of the LCD.

6. If desired, touch the Up or Down arrow to cycle through the

available choices: “PRSET1” through “PRSET5” (or their

previously changed names).

7. Accept or enter a name for the Preset:

a. To accept the standard name “PRSET1“ – “PRSET5” (or

previously stored name) for a new Preset configuration and to

update (overwrite) any previously stored configuration choices:

a1. At the desired choice, hold Mode/Set until the first character

blinks, giving an opportunity to change the name.

a2. To accept the standard (or existing) name, hold the Mode/

Set button again until “STORED” appears in the window.

This stores the standard or existing Preset name with the

associated function choices and returns the unit to normal

operation. The name of the stored preset will appear in the

top line of the display.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Comments to this Manuals

No comments

Audio-technica AEW-T1000A User Manual Page 14

Comments to this Manuals

Related products and manuals for Audio accessories Audio-technica AEW-T1000A