Audio Technica ATW-3171A User Manual download pdf (Page 14)

MICROPHONE ACCESSORIES / SPLITTERS AND COMBINERS

PRICES SUBJECT TO CHANGE WITHOUT NOTICE. Call today or visit us online!

ROLLS PB224 PHANTOM POWER

SUPPLY Perfect for any condenser

microphone, the PB224 powers even

the high-current draw microphones. The unit features a

rock solid 48 volts of clean phantom power. It can operate

from two internal 9V batteries or from the Rolls PS27S AC adapter.

ITEM DESCRIPTION PRICE

PB224 ....................... 2-channel phantom power supply ................................................. 81.00

PS27S ....................... AC adapter .................................................................................... 18.36

WHIRLWIND IMP COMBINER

2-TO-1 MIC COMBINER

This versatile box combines

2 microphone signals into 1

signal, and is built with the pre-

mium TRSP-2 transformer for opti-

mum durability. Features a phase

reverse switch which flips the polarity

of Input #2.

ITEM DESCRIPTION PRICE

IMP-COMBINER......... Mic combiner ............................95.54

WHIRLWIND SPLIT 6 Use this handy box when you

need to split a line level signal up to 6 times. Features

1 female XLR input wired to 6 male XLR outputs. Note:

It is not recommended that the SPLIT 6 be used to split

a microphone level signal to more than two outputs.

ITEM DESCRIPTION PRICE

SPLIT6................Line-level signal splitter ..................65.34

ti-

hase

polarit

RIC

WHIRLWIND ISOXL/ISOPOD The ISO-XL delivers transformer isolation for

eliminating hums and buzzes in your audio signal. The ISOPOD uses a transformer

to isolate any unbalanced 1/8" stereo connection (for example from a laptop or MP3

player) and safely and quietly sums the signal to mono XLR.

ITEM DESCRIPTION PRICE

ISO-XL ....................... Inline isolation transformer ........................................................... 43.83

ISOPOD ..................... Inline 1/8" stereo - XLR mono transformer .................................... 52.50

OPOD

The ISO XL delivers transformer isolation

for

SHURE PROBLEM SOLVERS

ITEM DESCRIPTION PRICE

A15AS.............Switchable mic attenuator, (15, 20, 25dB), passes

phantom, requires use of balanced signals.............................................. 45.60

A15BT.............Bridging transformer, in-line XLRF to XLRM,

33kΩ primary, 600Ω or 7.5kΩ secondary ............................................... 51.30

A15HP ............High pass filter, in-line XLRF to XLRM, roll off of 12dB

below 100Hz, requires use of balanced signals ........................................ 54.15

A15LA .............Line adapter, converts balanced line level signals to mic level

(50dB attenuation), in-line XLRF to XLRM configuration .......................... 41.33

A15PRS ..........Switchable phase reverser, requires balanced signals, XLRF to XLRM ........ 71.25

A15RF ............RF Filter, XLR in/out, passes phantom power ........................................... 49.88

A15TG.............Tone generator, 700Hz mic level signal, XLRM output ............................ 143.90

A85F...............Transformer, Lo-Z, XLRF to Hi-Z 1/4" phone plug, may be used in reverse ........... 18.75

A95U ..............Transformer, Lo-Z, XLRM to Hi-Z Amphenol MC1M

with 1/4" jack adapter, may be used in reverse ....................................... 48.72

A95UF ............As A95U, with XLRF low impedance connector ......................................... 48.72

A96F...............Transformer, Lo-Z XLRF to medium impedance mini plug

on attached 2' cable ................................................................................. 62.64

A120S.............In-line on/off switch (no connectors, requires soldering) ......................... 27.84

SWITCHCRAFT

AUDIOSTIX

These problem-solving

adapter boxes can be used

in a variety of situations.

The 318 converts 1/8" TRS

jack to balanced mono

3-pin male XLR mic-level

output with volume control

and ground lift swtich. The

319 converts 1/8" TRS jack

to balanced mono 3-contact

terminal block line-level output with pad and lift switches. The 366R is an AES/EBU

adapter which converts female XLR 110ohm to BNC 75ohm. The 367R is an AES/EBU

adapter which converts BNC 75ohm to male XLR 110ohm.

ITEM DESCRIPTION PRICE

318............................ Adapter, 1/8"TRS to 3-pin XLRM ................................................... 59.99

319............................ Adapter, 1/8"TRS to terminal block ............................................... 45.50

366R ......................... Adapter, AES/EBU, XLRF to BNC .................................................... 34.50

367R ......................... Adapter, AES/EBU, BNC to XLRM ................................................... 34.50

SWITCHCRAFT RMAS1 SINGLE CHANNEL MIC SPLITTER

Passive 3-way transformer isolated mic splitter with XLRF input,

XLRM 1-direct and 2-isolated, with ground lifts, -40dB pad. The

direct out passes phantom power.

ITEM DESCRIPTION PRICE

RMAS1....................... 1x3 mic splitter ............................................99.99

8CX

RADIAL ENGINEERING MIC ACCESSORIES

ITEM DESCRIPTION PRICE

JS2 ............................ Jensen transformer mic splitter with XLR input, thru,

and isolated monitor output +4th output with ground lift .......... 219.99

8CX ........................... Mic splitter, 8 channels on frame mount for install,

radial transformers ..................................................................... 699.99

HOTSHOTABI.............. Dual-to-single XLR source selector ............................................... 79.99

HOTSHOTABO............. Single-to-dual XLR source selector ............................................... 79.99

DM1-HOTSHOT........... Passive mic mute and signal redirector,

momentary switch with ground lift ............................................... 79.99

CHERRY-PICKER ....... Passive mic preamp selector with phantom power ..................... 349.99

GOLD-DIGGER ........... 4-channel mic selector with trim adjust on each channel .......... 349.99

CHERRY-PICKER

GOLD-DIGGER

HOTSHOTABI

DM1-HOTSHOT

HOTSHOTABO

JS2

VU VU-ATTEN ADJUSTABLE IN-LINE ATTENUATOR

Enables balanced low-impedance microphones to connect to low- to mid-impedance

inputs in high-SPL applications. Adjusts via a -10dB, -20dB or -30dB switch to match

the mic output to the input of mixers, portable recording devices, and more. Prevents

input overloading due to high-level signals and is compatible with phantom power.

ITEM DESCRIPTION PRICE

VU-ATTEN .................. Adjustable in-line attenuator, XLRF to XLRM ................................ 22.38

1 2 ... 9 10 11 12 13 14 15

Comments to this Manuals

No comments

Audio Technica ATW-3171A User Manual Page 14

Comments to this Manuals

Related products and manuals for Microphones Audio Technica ATW-3171A