Audio-technica ATW-T310B User Manual

3000 SeriesFrequency-agile True Diversity UHF Wireless SystemInstallation and OperationPOWERMODE/SETUHF SYNTHESIZED DIVERSITY RECEIVER ATW-R3100bALER

3000 Series Installation and Operation 104. Use the Up/Down arrow buttons to change the second three digits to the desired frequency.5. To activa

3000 Series Installation and Operation 11Troubleshooting GuideReceiver is not on (LCD window does not light). • Receiver Power switch is not presse

123000 Series Installation and Operation Specications†Overall SystemUHF Operating Frequencies Frequency Range Number of Frequencies Band C: 5

3000 Series Installation and Operation 13C-Band Scan Plan (541.500 – 566.375 MHz) Scan - 1 Scan - 2 Scan - 3 Scan - 4 Scan - 5 Scan - 6 Scan - 7 Sca

14U.S. Two-Year Limited WarrantyThis product and selected Audio-Technica brand products purchased in the U.S.A. from an authorized Audio-Technica (A.T

15Statement of Compliance

Audio-Technica U.S., Inc.1221 Commerce Drive, Stow, Ohio 44224 USA +1 (330) 686-2600Audio-Technica LimitedOld Lane, Leeds LS11 8AG England +44 (0) 113

3000 Series Installation and Operation 2This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device doe

3000 Series Installation and Operation 3is detected, reducing the possibility of interference. As a result, 3000 Series transmitters and receivers mus

3000 Series Installation and Operation 4 be to the left (ground connected). If hum caused by a ground loop occurs, slide switch to the right (grou

3000 Series Installation and Operation 5The squelch level is adjustable from 15 dB (the default value) to 39 dB in 6 dB steps. Increasing the squelch

3000 Series Installation and Operation 6modulation. When the transmitter is un-muted, it produces both RF and audio.To mute the transmitter (cut off t

3000 Series Installation and Operation 7UniPak® Transmitter FunctionsFunction Menu Default Setting* Choices (Edit)▲▼Wrap-around(Transmitter powers-up

3000 Series Installation and Operation 8Transmitter SetupBattery Selection and InstallationEach transmitter uses two 1.5V AA batteries, not included.

3000 Series Installation and Operation 9System OperationTurn the receiver on by pressing in the Power switch. Do not switch on the transmitter yet.The