Audio Technica AT2020USB+ Instruction Manual

AT2020USB+ Instruction Manual AT2020USB+ Cardioid Condenser USB Microphone Contents Introduction & features 3 Setting up your microphone with p

10Additional InformationUsing headphonesWarning: Turn the volume control down before using the headphones. The 1/8" (3.5 mm) headphone jack on th

11Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 20 – 20,000 Hz Power Requirements: USB

Audio-Technica U.S., Inc.1221 Commerce Drive, Stow, Ohio 44224 USA +1 (330) 686-2600 ©2012 Audio-Technica U.S., Inc. P52458 To reduce the e

2Compliance with FCC rules (USA only)This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this

3Thank you for buying the Audio-Technica AT2020USB+ Cardioid Condenser USB Microphone. Equipped with a USB output, this microphone is designed for dig

41. Capsule — Condenser microphone element with cardioid polar pattern2. Blue LED — Blue light shows microphone is receiving USB power3. Headphone

51. Plug the free end of the provided USB cable into the USB port on your computer. The microphone’s blue LED will illuminate, indicating the microp

6Preliminary setup with Mac OS X (continued)5. Click the output tab and make certain AT2020USB+ is selected as the default output device. (This shou

71. Plug the free end of the USB cable into the USB port on your computer. The microphone’s blue LED light will illuminate, indicating the mic is r

8Preliminary setup with Windows 7 (continued)4. Select Sound.5. The following screen will pop up:

96. Select the Recording tab, and choose AT2020USB+ as the default device. 7. Double click on the AT2020USB+ icon to open the Microphone Propertie